Item # ESTAsym 3D, ESTAsym 3D on Marsh Electronics, Inc.

		\| Shipping \| Tax \| Terms
Shopping Cart	0 items

Request for Quote	0 items

All Categories > Manufacturers > Vishay > Heavy-Current Capacitors > High Voltage Power Capacitors > High Voltage Power Capacitors > Item # ESTAsym 3D

Printable Page Email

Email This Page

Save To Favorites


	ESTAsym 3D
	QUOTE

Email This Page

Save To Favorites

larger image

SCOPE
Single phase capacitor units from 1 kV up to maximum 24 kV, 50 or 60 Hz, 20 kVAr up to maximum 1000 kVAr for indoor or outdoor use.
- with dead casing, open terminal IP00 (2 bushings)
- with dead casing, type of enclosure IP55 (2 bushings)
- with live casing, open terminal IP00 (1 bushing)
Three phase capacitor units from 1 kV up to maximum 12 kV, 50 or 60 Hz, 20 kVAr up to max. 800 kVAr with pressure monitoring device.
- with dead casing (3 bushings), open terminal IP00 (indoor use only)
- with dead casing (3 bushings), protected terminals, type of enclosure IP55 (indoor or outdoor)

STANDARDS
- VDE 0560/4 "Bestimmungen fur Leistungs-Kondensatoren"
- IEC 60871-1 Power Capacitors
- IEC 143 Series capacitors for power systems
- AS 2897 Shunt Capacitors for connection to Power frequency systems
- ANSI IEEE Std 18 Shunt power capacitors
- NEMA CP-1 Shunt Capacitors
- CSA C22.2 No. 190 Capacitors for power factor correction
- BS 1650 Specification for Capacitors for connection to power frequency systems

Capacitors in accordance with other standards, available upon request.

QUALITY MANAGEMENT SYSTEM
ISO 9001, BS 5750

QUALIFICATIONS
- EDF (HN 54-S-05)
- CSA Std. C22.2 No 190-M1985

SAFETY REGULATIONS
When installing the equipment, relevant ICE or VDE recommendations shall be observed, in particular VDE 0101 and 0111, as well as VDE 0560 Part 4 Section C.
Quality management system: ISO 9001, BS 5750
Qualifications: EDF (HN 54-S-05), CSA

Important!
If the pressure monitoring device has operated, the capacitor must not be placed back into service, but returned together with the device to our factory for examination.

Please Click on Request Information to specify your custom requirements.

Specifications

Power Factor Correction

CASING		Bakelite, resistant up to 100°C

Electrical Connection		AMP-plug type lugs 6.35 mm

Contacts		1 change-over contact 15 A/220 V ohmic load

Insulation Test Voltage		1500 V

Setting Range		0.2 - 0.9 bar

Standard Setting		0.6 - 0.8 bar

Pressure Limit		6.0 bar

Accessory		Rubber protective cap

Temperature Range		-25 up to +70 ºC

Fitting		R 1/4" and mechanical protection

Mounting position		Dependant on design of capacitor

Testing		Functional test and leakage test

MORE IMAGES


	· Curves

	· Mounting

DOWNLOADS


		General Information High Voltage Power Capacitors (PDF, 114KB)

		Request for Quotation Info (PDF, 60KB)

		Capacitor Assembly (PDF, 163KB)

ESTAsym 3D

CASING

Electrical Connection

Contacts

Insulation Test Voltage

Setting Range

Standard Setting

Pressure Limit

Accessory

Temperature Range

Fitting

Mounting position

Testing